Chinese translation for "tangential direction"

正切方向

Related Translations:

tangential servo:  切向伺服

tangential vane:  切向叶片

tangential resistance:  接切阻力切线阻力切向阻力

tangential hobbing:  切向滚削

tangential support:  切线支座

tangential feed:  切线进给切线进料切向进给

tangential admission:  切向供给切向进给切向进汽

tangential speed:  切线速度切向速度（率）

tangential irradiation:  切线照射

tangential property:  切线性质

Example Sentences:

	1.	A mesh smoothing algorithm based on tangential direction 基于切向的网格平滑算法
	2.	The feedrate in tangential direction was adjusted by the fuzzy velocity controller for reducing the worst burrs and defects to obtain better quality contour 而模糊速度控制器被用来调节工具进给速度，从而彻底清除较大的毛刺，避免损害工件和刀具，得到理想的加工表面。
	3.	A method presented for designing diagonal impeller blading from blade elements defined on cones which pass through the blade - edge streamline locations . the staking line for the blade elements can be leaned in both the axial and tangential directions 叶片造型分为基元叶片确定及沿叶高的积叠方式，在叶片积叠过程中，考虑了气动力以及离心力力距对叶片积叠点的影响。
	4.	The results showed that : there were five stages in the rising process of the internal temperature of untreated , fire - retardant solution soaked , and fire - proof paint coated wood during the fire ; the carbonization rate of wood decreased by 21 . 1 % ~ 35 . 6 % and the rising speed of internal temperature also declined greatly when wood was soaked in fire - retardant solution or coated with fireproof paint ; the carbonization rate of white pine was 8 . 5 % ~ 17 . 4 % higher than that of the northeast china ash ; for untreated wood , the carbonization rate in tangential direction was 5 . 8 % ~ 10 . 5 % higher than that in radial direction ; the internal temperature of wood varies with the developing direction of combustion 结果表明：火灾发生过程中未处理木材、阻燃浸渍处理和涂刷防火徐料木材内部温度上升过程出现5个阶段；经过阻燃浸渍处理和涂刷防火涂料后，木材的燃烧炭化速度降低了21 . 1 % ~ 35 . 6 % ，内部温度上升速度大幅度下降；白皮松木材的燃烧炭化速度比水曲柳木材的燃烧炭化速度快8 . 5 % ~ 17 . 4 % ；未处理木材沿弦向的燃烧炭化速度比径向快5 . 8 % ~ 10 . 5 % ；木材内部的温度变化沿燃烧推进方向不同而不同。
	5.	In contrast , taken as a contact problem , the principal characters of the interfaces can be reflected : ( 1 ) the contact interface is of shear strength which implies that a generic pair of contact points on the interface will displace coincidentally if the tangential force at this point has not reached the limit resistance , else , relative slide between the points will occur along the tangential direction . ( 2 ) no matter the relative slide occurs or not , the contact bodies cannot invade each other in any wise 同时指出，将桩土相互作用按接触问题来处理，可以更好地反映出该接触面的主要力学特征，即： ( 1 )接触面具有相应的“抗剪强度” ，即当接触面上的某一点处的切向应力小于该点处的抗剪强度时，该处桩土共同变形；达到其抗剪强度时，则沿切向发生滑动； ( 2 )在整个变形过程中，桩与土不能互相侵入。
	6.	According with analyzing the forces acting on a particle , put forward the particle accurate motion trajectory which is determined by the certainty axial and radial force , as well as the uncertainty stochastic forces based on the above factors , the following motion characteristics between the solid and the liquid was analyzed , the following property of solid - liquid exists in all radial , axial and tangential directions 摘要通过对旋流器内固体颗粒的受力分析，提出固体颗粒精确运动轨迹结构是由确定性的径向力、轴向力以及不确定性的随机力所决定，并对固体颗粒存在的随机因素进行了分析。
	7.	( 2 ) starting off with analyzing the forces affected on single dry solid granule on the roller screen , the relative slippage and slipping condition of granule at the tangential direction and axis direction of roller screen are discussed , and the average slipping conveyance velocity from feeding end to discharging end is given . the throwing conveyance of granule is discussed , the throwing coefficient of roller screen and its varying rule , and the concept of average throwing coefficient and its computing method are put forward , the starting condition and terminating condition for throwing motion of granule on the roller screen and the throwing conveyance velocity of granule are researched . the influence on throwing motion of granule by the rotating velocity of roller screen is discussed as well ( 2 )从筒式筛网上单颗干固相颗粒的受力分析着手，讨论了颗粒在筒式筛网面上的切向相对滑动和轴向相对滑动及滑动条件，并导出了颗粒从进料端向出料端滑动运移平均速度；讨论了颗粒的抛掷运移，给出了筒式筛网上的抛掷指数及其变化规律，提出了筒式筛网的平均抛掷指数的概念及计算方法，研究了筒式筛网上颗粒抛掷运移的产生条件和终止条件，以及颗粒抛掷运移的输送速度；还讨论了筒式筛网的旋转角速度对颗粒抛掷运动产生的影响。
	8.	Thus , the author attempt to develop a new model of anchor bolts so as to avoid the disadvantages . in the model , the interaction between the bolt and the geotechnical mass is taken as contact problem , in which if the tangential force at the interface has reached the limit resistance , the relative slide in the interface will occur along the tangential direction . also , the computational parameters in the model have tangible physical meanings and have less difficulty to obtain 为此，本论文提出一种新的锚杆计算模型，它将锚杆与周围岩土体间的相互作用作为接触问题考虑，其计算理论比较严谨，能较好地模拟出锚杆的受力状态及锚杆与岩土体间的剪切?滑移作用，即：锚杆?岩土体之间的接触面具有抵抗强度，当接触面上切向应力小于其抵抗强度时，锚杆与岩土体共同变形；达到抵抗强度时则沿切向发生相对滑动。
	9.	A discretization equation is derived by using a finite volume method in three - dimensional cylindrical polar coordinate system . algebraic equations are solved by iteration with a line - by - line method that is a combination of tdma in axial and radial directions , ctdma in tangential direction and adi method in three directions . the pressure and velocity coupling are solved with the simple algorithm 在三维圆柱坐标下，利用有限体积法推导离散方程；在轴向与径向用三对角矩阵法( tdma ) ，在周向采用循环三对角矩阵法( ctdma ) ，采用交替方向亚松弛叠代法( adi )求解方程；推导同位网格下的压力修正方程，用simple算法处理速度与压力的耦合；为加速收敛，采用适当的松弛因子。

Similar Words：

"tangential deformation" Chinese translation, "tangential development method" Chinese translation, "tangential deviation" Chinese translation, "tangential di lacement" Chinese translation, "tangential dipoles" Chinese translation, "tangential dislocation" Chinese translation, "tangential displacement" Chinese translation, "tangential distortion" Chinese translation, "tangential distortion of lens" Chinese translation, "tangential division" Chinese translation